Dell 3100cn - Color Laser Printer Скачать руководство пользователя страница 112

Страница: 112 / 219

Feed paper from the tray loaded with A5 (148 x 210 mm).

Feed paper from the tray loaded with A6 (105 x 148 mm).

Feed paper from the tray loaded with B5 (182 x 257 mm).

Feed paper from the tray loaded with Letter (8.5 × 11 inches).

Feed paper from the tray loaded with Folio (8.5 × 13 inches).

Feed paper from the tray loaded with Legal (8.5 × 14 inches).

Feed paper from the tray loaded with Executive (7.25 × 10.5 inches).

Feed paper from the tray loaded with Monarch (3.875 × 7.5 inches).

COM10

Feed paper from the tray loaded with Envelope #10 (4.125 × 9.5 inches).

Feed paper from the tray loaded with DL (110 x 220 mm).

Feed paper from the tray loaded with C5 (162 x 229 mm).

LP 210x900

Feed paper from the tray loaded with LP210x900 (210 x 900 mm).

Feed paper from the tray loaded with MxNmm defined by users.

Possible range specified:
Width: 90.0 to 215.9 mm
Length: 139.7 to 355.6 mm

Feed paper from the tray loaded with MxN inches defined by users.

Possible range specified:
Width: 3.54 to 8.50 inches
Length: 5.50 to 14.0 inches

If this option is not specified or the tray specified is not available, feed paper from the default tray.

-t

Turns on the

save toner

mode for printing. The print result will be fainter than that of normal printing. In some cases, this option will be ignored.

-r

Rotates the image by 90o and uses the paper in the landscape orientation.

-n

Disables the addition of the showpage. It is used when files converted to the PostScript language program are merged with files created with other

Содержание 3100cn - Color Laser Printer




























































































































































































































Результаты поиска

Содержание 3100cn - Color Laser Printer

Отзывы:

Похожие инструкции для 3100cn - Color Laser Printer

Бренды по названию

Популярные бренды

Dell 3100cn - Color Laser Printer, Руководство пользователя

Результаты поиска

Содержание 3100cn - Color Laser Printer

Отзывы:

Похожие инструкции для 3100cn - Color Laser Printer

Бренды по названию

Популярные бренды