Dell 1545 - Inspiron - Pentium 2 GHz Скачать руководство пользователя страница 34

Страница: 34 / 51

Back to Contents Page

Keyboard

Dell™ Inspiron™ 1545 Service Manual

Removing the Keyboard

Replacing the Keyboard

Removing the Keyboard

Follow the instructions in

Before You Begin

Remove the center control cover (see

Removing the Center Control Cover

Remove the two screws at the top of the keyboard.

Carefully slide the keyboard out of the computer and turn it over to access the keyboard connector. Do not pull hard on the keyboard.

Lift the connector latch that secures the keyboard cable to the connector on the system board and remove the cable.

Lift the keyboard away from the computer.

Replacing the Keyboard

Slide the keyboard cable into the connector on the system board and press down on the connector latch that secures the keyboard cable to the system
board connector.

Align the tabs along the bottom of the keyboard with the slots of the palm rest and slide the keyboard under the palm rest.

CAUTION:

Before working inside your computer, read the safety information that shipped with your computer. For additional safety best

practices information, see the Regulatory Compliance Homepage at www.dell.com/regulatory_compliance.

NOTICE:

To avoid electrostatic discharge, ground yourself by using a wrist grounding strap or by periodically touching an unpainted metal surface (such

as a connector on the back of the computer).

NOTICE:

To help prevent damage to the system board, remove the main battery (see

Before Working Inside Your Computer

) before working inside the

computer.

NOTICE:

Only a certified service technician should perform repairs on your computer. Damage due to servicing that is not authorized by Dell™ is not

covered by your warranty.

NOTICE:

The keycaps on the keyboard are fragile, easily dislodged, and time-consuming to replace. Be careful when removing and handling the

keyboard.

NOTICE:

Be extremely careful when removing and handling the keyboard. Failure to do so could result in scratching the display panel.

keyboard

screws (2)

keyboard tabs (6)

connector latch

keyboard cable

NOTICE:

The keycaps on the keyboard are fragile, easily dislodged, and time-consuming to replace. Be careful when removing and handling the

keyboard.

Содержание 1545 - Inspiron - Pentium 2 GHz




















































Результаты поиска

Содержание 1545 - Inspiron - Pentium 2 GHz

Отзывы:

Похожие инструкции для 1545 - Inspiron - Pentium 2 GHz

Бренды по названию

Популярные бренды

Dell 1545 - Inspiron - Pentium 2 GHz, Руководство по обслуживанию

Результаты поиска

Содержание 1545 - Inspiron - Pentium 2 GHz

Отзывы:

Похожие инструкции для 1545 - Inspiron - Pentium 2 GHz

Бренды по названию

Популярные бренды