Dell 10Gb Ethernet Pass Through II
Rev 1.00
7
1.5
10GbE PTM Status Lights
The 10GbE PTM Status lights indicate whether the switch is receiving power from the chassis, and the state
of the 10GbE PTM.
Figure 3: Indicator LEDs
Table 4 - 10GbE PTM states and LED configurations:
Link up
on
off
Both the internal and external links are up
Data activity
on
blink
Link is up and data packets are sent or received
Link protocol mismatch
off
on
Refer to
Section 1.3, “Link Protocol Mismatch
Condition,” on page 5
for details.
LED
10GbE PTM Status
Indication
Green
Status
OFF
OFF
OFF
ON
OFF
Boot in Progress
10GbE PTM not ready
Blinking Blue
ON
BLINKING BLUE
The CMC is identifying
the newly installed 10GbE PTM
ON
ON BLUE
10GbE PTM is on and operating Nor-
mally
ON
ON or BLINKING
AMBER
Fault in System
Self-diagnosed
OFF
ON or BLINKING
AMBER
Fault in System
CMC-detected
Table 3 - LED Behavior
Condition
Green LED
Amber LED
Description
The I/O Module is on and
ready when both the blue
and green LEDs are lit.
This LED can be blue or
amber. A fault is indicated
when the amber LED is
blinking. See Table 4.
