29
Dell EMC VxRail Multirack Deployment Guide
6.1.3
show lldp neighbors
The
show
lldp neighbors
command identifies devices that are directly connected to the switch.
Vmnic0
is shown along with the VLTi links,
ethernet 1/1/49-1/1/52
, and both upstream network-facing ports,
ethernet1/1/53
and
ethernet1/1/54
.
sfo01-leaf03#
show lldp neighbors | except Broadcom
Loc PortID Rem Host Name Rem Port Id Rem Chassis Id
------------------------------------------------------------------------
ethernet1/1/1 sfo01w01vxrail01 00:0a:f7:f6:2d:e0 vmnic0
ethernet1/1/3 sfo01w01vxrail02 00:0a:f7:f6:1b:a0 vmnic0
ethernet1/1/49 sfo02-leaf04 ethernet1/1/49 54:bf:64:be:f7:40
ethernet1/1/5 sfo01w01vxrail03 00:0a:f7:f5:ee:40 vmnic0
ethernet1/1/50 sfo02-leaf04 ethernet1/1/50 54:bf:64:be:f7:40
ethernet1/1/51 sfo02-leaf04 ethernet1/1/51 54:bf:64:be:f7:40
ethernet1/1/52 sfo02-leaf04 ethernet1/1/52 54:bf:64:be:f7:40
ethernet1/1/53 sfo-spine01 ethernet1/1/17 20:04:0f:11:42:62
ethernet1/1/54 sfo-spine02 ethernet1/1/17 20:04:0f:11:47:62
ethernet1/1/7 sfo01w01vxrail04 00:0a:f7:f5:fa:c0 vmnic0
6.1.4
show interface
The
show interface
command verifies that the flow control is enabled for receive and transmit. The
following example shows that the interfaces are connected to the four VxRail nodes (
ethernet 1/1/1
,
1/1/3
,
1/1/5
, and
1/1/7
) and are configured for both receive and transmit.
sfo01-leaf03#
show interface | grep "Flowcontrol rx on tx on"
Flowcontrol rx on tx on
Flowcontrol rx on tx on
Flowcontrol rx on tx on
Flowcontrol rx on tx on