18
Dell EMC VxRail Multirack Deployment Guide
4.1.2
Switch settings
Table 3 shows all unique values for the four S5248F-ON switches. The table is listed to provide a summary of
the configuration differences between each switch and between each VLT switch pair. Switches
sfo01-
leaf01
and
sfo01-leaf02
are part of the existing infrastructure and shown in
Appendix A.
Unique switch settings
Setting
S5248F-Leaf1A
S5248F-Leaf1B
S5248F-Leaf2A
S5248F-Leaf2B
Hostname
sfo01-leaf03
sfo01-leaf04
sfo02-leaf03
sfo02-leaf04
Management IP
100.67.167.36/24
100.67.167.35/24
100.67.166.36/24
100.67.166.35/24
P2P IP #1
192.168.1.9/31
192.168.1.11/31
192.168.1.13/31
192.168.1.15/31
P2P IP #2
192.168.2.9/31
192.168.2.11/31
192.168.2.13/31
192.168.2.15/31
Router ID
10.0.2.5
10.0.2.6
10.0.2.7
10.0.2.8
Loopback0 IP
10.222.222.3/32
10.222.222.3/32
10.222.222.4/32
10.222.222.4/32
RSTP priority
0
4096
0
4096
VLAN 4000 IP
10.255.2.4/31
10.255.2.5/31
10.255.2.6/31
10.255.2.7/31
Remote VTEPS
10.222.222.4
10.222.222.64
10.222.222.4
10.222.222.64
10.222.222.3
10.222.222.64
10.222.222.3
10.222.222.64
Note:
All switch configuration commands are provided in the file attachments. See
Section 1.4
for instructions
on accessing the attachments.
4.2
Switch prerequisites
Before starting, verify that all of the switches meet the following requirements:
•
The latest version of Dell EMC OS10 Enterprise Edition (OS10EE) is installed
•
All OS10EE licenses are entered
•
Each switch is in a factory default state
4.2.1
Verify OS10EE version
The Dell EMC Networking S5248F-ON switches must have OS10EE version 10.4.2 or later to support
Network Virtualization Overlays (NVOs). Run the
show version
command to check the operating system
version.
Note:
Dell EMC recommends upgrading to the latest release available on
Dell Digital Locker
(account
required).
OS10#
show version
Dell EMC Networking OS10-Enterprise
Copyright (c) 1999-2018 by Dell Inc. All Rights Reserved.
OS Version: 10.4.2.0
Build Version: 10.4.2.0.241
Build Time: 2018-12-03T17:28:37-0800
