Dell EMC PowerSwitch N3200-ON Series, Руководство по установке

Страница: 41 / 51

ONIE: Embed ONIE
For downloading and updating ONIE from a URL and erases any installed OS
During the initial setup, the switch boots to ONIE Install. ONIE Install starts the discovery process. For more information, see Installation
using ONIE .
NOTE: For more information, see the Open Networking Hardware Diagnostic Guide at www.dell.com/support .
NOTE: After you have securely installed and powered on the N3200-ON Series switch, to configure your switch, see
your third-party ONIE-compatible operating system or the Dell EMC operating system documentation.
Check your switch
To confirm that ONIE is working properly, use the
onie-sysinfo
command at the ONIE prompt.
ONIE:/ # onie-sysinfo
x86_64-dellemc_< platform >_c3338-r0
ONIE:/ # onie-sysinfo -c
x86_64
ONIE:/ # onie-sysinfo -v
x.xx.x.x-x
ONIE:/ #
ONIE:/ # uname -a
Linux onie x.x.xx-onie+ #1 SMP Mon Jun 24 21:50:18 PDT 2019 x86_64
ONIE:/ # lspci
00:1f.5 Class 0c80: 8086:19e0
00:00.0 Class 0600: 8086:1980
00:12.0 Class 0880: 8086:19ac
00:15.0 Class 0c03: 8086:19d0
00:0b.0 Class 0604: 8086:19a6
00:18.0 Class 0780: 8086:19d3
00:09.0 Class 0604: 8086:19a4
00:14.0 Class 0106: 8086:19c2
00:1f.4 Class 0c05: 8086:19df
00:05.0 Class 0807: 8086:19a2
00:1f.2 Class 0580: 8086:19de
00:1c.0 Class 0805: 8086:19db
00:1f.0 Class 0601: 8086:19dc
02:00.0 Class 0200: 8086:1533
00:04.0 Class 0600: 8086:19a1
01:00.0 Class 0200: 14e4:b771
(NPU PCI detection)
ONIE:/ #
Uninstall an existing OS
CAUTION: To install a networking operating system (NOS) on a switch that has a previously installed OS, you must first
uninstall the existing OS. The
ONIE: Uninstall OS
option deletes the switch configuration and all disk partitions.
To uninstall an existing NOS, boot up the switch. When the ONIE boot menu displays, use the arrow keys to scroll the asterisk to select
the
ONIE: Uninstall OS
option. This selection stops the switch from booting to the default setting of
ONIE: Install OS
.
+--------------------------------------------------------+
| ONIE: Install OS |
| ONIE: Rescue |
|*ONIE: Uninstall OS |
| ONIE: Update ONIE |
| ONIE: Embed ONIE |
| ONIE: Diag ONIE |
+--------------------------------------------------------+
After the ONIE uninstall process completes, the switch boots to
ONIE: Install OS
mode.
Installation using ONIE 41