manualshive.com logo in svg

Dell EMC PowerEdge R840, Технические характеристики

Поделиться
Скачать
Dell EMC PowerEdge R840 Скачать руководство пользователя страница 36

NIC indicator codes

Each NIC on the back of the system has indicators that provide information about the activity and link status. The activity LED indicator 
indicates if data is flowing through the NIC, and the link LED indicator indicates the speed of the connected network.

Figure 22. NIC indicator codes

1

Link LED indicator

2

Activity LED indicator

Table 27. NIC indicator codes

Status

Condition

Link and activity indicators are off.

The NIC is not connected to the network.

Link indicator is green, and activity indicator is blinking 
green.

The NIC is connected to a valid network at its maximum port speed, and 
data is being sent or received.

Link indicator is amber, and activity indicator is blinking 
green.

The NIC is connected to a valid network at less than its maximum port 
speed, and data is being sent or received.

Link indicator is green, and activity indicator is off.

The NIC is connected to a valid network at its maximum port speed, and 
data is not being sent or received.

Link indicator is amber, and activity indicator is off.

The NIC is connected to a valid network at less than its maximum port 
speed, and data is not being sent or received.

Link indicator is blinking green, and activity is off.

NIC identify is enabled through the NIC configuration utility.

Power supply unit indicator codes

AC power supply units (PSUs) have an illuminated translucent handle that serves as an indicator.
The DC PSUs have an LED that serves as an indicator.

For more information about the PSU specifications, see 

Technical Specifications

.

For information about the event and error messages generated during POST, when a 2400W PSU is connected to a 110 V power source, 
see the Dell Event and Error Messages Reference Guide at 

www.dell.com/openmanagemanuals

.

The indicator shows whether power is present or if a power fault has occurred.

36

System diagnostics and indicator codes 

Содержание PowerEdge R840













































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды