manualshive.com logo in svg

Dell EMC PowerEdge R840, Технические характеристики

Поделиться
Скачать
Dell EMC PowerEdge R840 Скачать руководство пользователя страница 22

DIMM type

DIMM rank

DIMM capacity

Dual processors

Quad processors

Minimum RAM

Maximum RAM

Minimum RAM

Maximum RAM

NVDIMM-N: 16 
GB

NVDIMM-N: 192 
GB

NVDIMM-N: 16 
GB

NVDIMM-N: 192 
GB

NOTE: 

Do not mix 8 GB RDIMMs and 16 GB NVDIMM-Ns.

NOTE: 

Do not mix 64 GB LRDIMMs and 128 GB LRDIMMs.

Table 7. DIMM blank population rules

Processor configuration

Processor 1

Processor 2

Processor 3

Processor 4

Dual processor

Required

Required

Not required

Not required

Quad processor

Required

Required

Required

Required

RAID controller specifications

The PowerEdge R840 system supports:

•

Internal storage controller cards: PowerEdge RAID Controller (PERC) H330, PERC H730P, H740P, HBA330, and Boot Optimized Server 

Storage (BOSS-S1)

•

External storage controller cards: S140 and 12 Gbps SAS HBA

Drive specifications

Drives

The PowerEdge R840 system supports SAS, SATA, Nearline SAS hard drives/SSDs, or NVMe drives.

Table 8. Supported drive options for PowerEdge R840 system

Chassis options

Configurations

Eight hard drive chassis

Up to eight 2.5-inch SAS/SATA front accessible drives in slots 0–7

Up to eight 2.5-inch SATA front accessible drives in slots 0–7

Twenty-four drive chassis Up to twenty-four 2.5-inch SAS/SATA front accessible drives in slots 0–23

Up to twelve 2.5-inch SAS/SATA front accessible drives in slots 0–11 + twelve SAS/SATA/NVMe front 

accessible drives in slots 12–23

Up to twenty-four 2.5-inch NVMe front accessible drives in slots 0–23

Twenty four front + two 
rear drive chassis

Up to twenty-four 2.5 inch SAS/SATA front accessible drives in slots 0–23 + up to two 2.5-inch SAS/SATA 

rear accessible drives

Optical drives

The PowerEdge R840 system supports one optional slim SATA DVD-ROM drive or DVD +/-RW drive.

22

Technical specifications

Содержание PowerEdge R840













































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды