manualshive.com logo in svg

Dell EMC PowerEdge R740xd, Инструкция по установке и обслуживанию, Страница: 44 / 215

Поделиться
Скачать
Dell EMC PowerEdge R740xd Скачать руководство пользователя страница 44

Pre-operating system management

applications

You can manage basic settings and features of a system without booting to the operating system by using the system firmware.

Topics:

•

Options to manage the pre-operating system applications

•

System Setup

•

Dell Lifecycle Controller

•

Boot Manager

•

PXE boot

Options to manage the pre-operating system
applications

Your system has the following options to manage the pre-operating system applications:

•

System Setup

•

Dell Lifecycle Controller

•

Boot Manager

•

Preboot Execution Environment (PXE)

Related concepts

System Setup

 on page 44

Dell Lifecycle Controller

 on page 68

Boot Manager

 on page 68

PXE boot

 on page 70

System Setup

By using the 

System Setup

 screen, you can configure the BIOS settings, iDRAC settings, and device settings of your system.

These settings have already been pre-configured per solution requirements. Contact Dell EMC before you change these settings.

NOTE:

 Help text for the selected field is displayed in the graphical browser by default. To view the help text in the text

browser, press F1.

You can access system setup by one of the following:

•

Standard graphical browser—The browser is enabled by default.

•

Text browser—The browser is enabled by using Console Redirection.

Related concepts

System Setup details

 on page 45

Related tasks

Viewing System Setup

 on page 45

5

44

Pre-operating system management applications

Содержание PowerEdge R740xd
























































































































































































































Отзывы:

Нет отзывов