4
Remove the heat sink. For more information, see
.
CAUTION:
You may find the CMOS battery loss or CMOS checksum error displayed during the first instance of powering on the
system after the CPU or system board replacement which is expected. To fix this, simply go to setup option to configure the
system settings.
Steps
1
Using a Torx #T20 screwdriver, loosen the screws to release the processor socket cover. The sequence to loosen the screws is 3, 2,
and 1.
Figure 42. Removing screws on the force plate
2
Release the processor socket frame by lifting up the blue latches.
Installing and removing system components
81
