Figure 30. Group topology
Define networks
Prerequisites
Networks or subnets should be defined to meet the Cloud Foundation requirements. The prerequisites to define networks are as follows:
1
Create chassis groups
2
Cloud Foundation management network
3
vMotion network
4
vSAN network
5
VXLAN network
6
Uplink1 network
7
Uplink2 network
To define networks using the OME-Modular console, perform the following steps:
Steps
1
Open the
OME-M
console.
2
From the
Configuration
menu, click
Networks
.
3
In the
Network
pane, click
Define
.
4
In the
Define Network
window, complete the following:
a Enter the name of the network.
b Optionally, enter the description in the
DESCRIPTION
box.
c Enter the value
1611
in the
VLAN ID
box.
d From the
Network Type
list, select
General Purpose (Bronze)
.
e Click
Finish
.
5
Repeat steps 1-4 to create the remaining five VLANs and any other VLANs required.
A sample completed configuration is shown in the following figure:
Figure 31. VLAN configuration
56
SmartFabric network configuration
Содержание PowerEdge MX7000
