manualshive.com logo in svg

Dell EMC PowerEdge MX7000, Руководство по развертыванию

Поделиться
Скачать
Dell EMC PowerEdge MX7000 Скачать руководство пользователя страница 32

Cloud Foundation and SDDC design 

considerations

VMware Cloud Foundation relies on a set of key infrastructure services to be made available externally. You must configure these external 
services before you begin deployment.

NOTE: 

This section is universal for Cloud Foundation deployments regardless of hardware platform. The content in this section is 

also available in the 

VMware Cloud Foundation Planning and Preparation Guide

, and is included here for reference. The original 

content in the VMware website includes additional sections which are not in the scope of this document.

Topics:

•

External services overview

•

Physical network requirements

•

Network pools

•

VLANs and IP subnets

•

Host names and IP addresses

External services overview

Many external services are required for the initial deployment of Cloud Foundation and for the deployment of other optional components 
such as vRealize Operations or vRealize Automation. The following table lists the required and optional external services and dependencies:

Table 4. Required and optional external services and dependencies

Service

Purpose

Active Directory (AD)

(Optional) Provides authentication and authorization.

NOTE: 

AD is required if you are deploying vRealize 

Automation.

Dynamic Host Configuration Protocol (DHCP)

Provides automated IP address allocation for VXLAN Tunnel 
Endpoints (VTEPs).

Domain Name Service (DNS)

Provides name resolution for the various components in the 
solution.

Network Time Protocol (NTP)

Synchronizes time between the various components.

Simple Message Transfer Protocol (SMTP)

(Optional) Provides method for email alerts.

Certificate Authority (CA)

(Optional) Allows replacement of the initial self-signed certificates

 

that are used by Cloud Foundation.

NOTE: 

A CA is required if you are deploying vRealize 

Automation.

7

32

Cloud Foundation and SDDC design considerations

Содержание PowerEdge MX7000




















































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды