Dell EMC Inspiron 3671 Скачать руководство пользователя

Страница: 65 / 73

Power Management

USB Wake Support

Enable the USB devices to wake the computer from Standby mode.

NOTE:

This feature is only functional when the AC power adapter is

connected. If the AC power adapter is removed during Standby, the
system setup removes power from all the USB ports to conserve battery
power.

By default,

Enable USB Wake Support

is selected.

Wake on LAN/WLAN

Enable or disable the feature that powers on the computer from the Off state when
triggered by a LAN signal.

•

Disabled

(default)

•

LAN Only

•

WLAN Only

•

LAN or WLAN

•

LAN with PXE Boot

Block Sleep

When Block Sleep is enabled, the computer does not go to Sleep (S3) state.

By default,

Block Sleep

is not selected.

Table 11. System setup options—POST Behavior menu

POST Behavior

Numlock LED

Enable or disable Numlock when the computer boots up.

By default,

Enable Numlock LED

is selected.

Keyboard Errors

Set the computer to report keyboard-related errors when the computer boots up.

By default,

Enable Keyboard Error Detection

is selected.

Fastboot

Enable to set the speed of the boot process by bypassing some of the compatibility
steps.

•

Minimal

•

Thorough

(default)

•

Auto

Extend BIOS POST Time

Set the BIOS POST time for an additional pre-boot delay.

•

0 seconds (default)

•

5 seconds

•

10 seconds

Full Screen Logo

Display the full screen logo if your image matches the screen resolution.

By default,

Enable Full Screen Logo

is not selected.

Warnings and Errors

Enable or disable prompts on warning and errors.

•

Prompt on Warnings and Errors

(default)

•

Continue on Warnings

•

Continue on Warnings and Errors

Table 12. System setup options—Virtualization Support menu

Virtualization Support

Virtualization

Specify whether a Virtual Machine Monitor (VMM) can utilize the additional hardware
capabilities provided by Intel Virtualization Technology.

By default,

Enable Intel Virtualization Technology

is selected.

VT for Direct I/O

Specify whether a Virtual Machine Monitor (VMM) can utilize the additional hardware
capabilities provided by Intel Virtualization Technology for Direct I/O.

By default,

Enable VT for Direct I/O

is selected.

System setup

Содержание Inspiron 3671










































































Результаты поиска

Содержание Inspiron 3671

Отзывы:

Похожие инструкции для Inspiron 3671

Бренды по названию

Популярные бренды

Dell EMC Inspiron 3671, Руководство по обслуживанию

Результаты поиска

Содержание Inspiron 3671

Отзывы:

Похожие инструкции для Inspiron 3671

Бренды по названию

Популярные бренды