Dell EMC Inspiron 3671 Скачать руководство пользователя страница 60

Страница: 60 / 73

General

64-Bit Technology

Displays whether 64-bit technology is used.

Device Information

SATA-0

Displays the SATA-0 device information of the computer.

SATA-1

Displays the SATA-1 device information of the computer.

SATA-2

Displays the SATA-2 device information of the computer.

SATA-3

Displays the SATA-3 device information of the computer.

M.2 PCIe SSD-0

Displays the M.2 PCIe SSD information of the computer.

LOM MAC Address

Displays the LAN On Motherboard (LOM) MAC address of the computer.

Video Controller

Displays the video controller type of the computer.

Audio Controller

Displays the audio controller information of the computer.

Wi-Fi Device

Displays the wireless device information of the computer.

Bluetooth Device

Displays the Bluetooth device information of the computer.

Boot Sequence

Boot Sequence

Displays the boot sequence.

Allows you to change the order in which the computer attempts to find an operating system. The
options are:

•

Windows Boot Manager

•

Onboard NIC(IPV4)

•

Oboard NIC(IPV6)

By default, all the check boxes are selected. You can clear the check boxes or change the boot order.

Boot List Option

Displays the available boot options.

Allows you to change the boot list option:

•

Legacy External Devices

•

UEFI

(default)

You can also add or delete a boot option.

Advanced Boot Options

Enable or disable legacy boot options when in UEFI boot mode.

•

Enable Legacy Option ROMs

(default)

•

Enable Attempt Legacy Boot

UEFI Boot Path Security

These options control whether the computer will prompt the user to enter the Admin password (if
set) when booting a UEFI boot path from the F12 Boot Menu .

•

Always Except Internal HDD

(default)

•

Always, Except Internal HDD&PXE

•

Always

•

Never

Date/Time

Displays the current date in MM/DD/YY format and current time in HH:MM:SS AM/PM format.

Table 4. System setup options—System Configuration menu

System Configuration

Integrated NIC

Controls the on-board LAN controller.

Enable UEFI Network Stack

Allows you to configure the integrated network controller. The options are:

•

Disabled

•

Enabled

•

Enabled w/PXE

(default)

System setup

Содержание Inspiron 3671










































































Результаты поиска

Содержание Inspiron 3671

Отзывы:

Похожие инструкции для Inspiron 3671

Бренды по названию

Популярные бренды

Dell EMC Inspiron 3671, Руководство по обслуживанию

Результаты поиска

Содержание Inspiron 3671

Отзывы:

Похожие инструкции для Inspiron 3671

Бренды по названию

Популярные бренды