Dell EMC Inspiron 3671 Скачать руководство пользователя

Страница: 35 / 73

Replacing the 2.5-inch hard drive

NOTE:

Before working inside your computer, read the safety information that shipped with your computer and follow

the steps in

Before working inside your computer

. After working inside your computer, follow the instructions in

After

working inside your computer

. For more safety best practices, see the Regulatory Compliance home page at

www.dell.com/regulatory_compliance

Procedure

NOTE:

Depending on the configuration ordered there may be up to two 2.5-inch hard drives installed in your computer.

The following procedure lists the steps to remove the 2.5-inch hard drive(s) in either or both locations.

1. Align and place the slots on the hard drive with the posts on the chassis, then hold the hard drive in place.

NOTE:

Ensure that the hard drive is seated correctly with the posts on the chassis before replacing the screws.

2. Replace the two screws (M3x3.5) that secure the hard drive to the chassis.
3. Connect the hard-drive data cable and power cable to the hard drive.

Replacing the 2.5-inch hard drive

Содержание Inspiron 3671










































































Результаты поиска

Содержание Inspiron 3671

Отзывы:

Похожие инструкции для Inspiron 3671

Бренды по названию

Популярные бренды

Dell EMC Inspiron 3671, Руководство по обслуживанию

Результаты поиска

Содержание Inspiron 3671

Отзывы:

Похожие инструкции для Inspiron 3671

Бренды по названию

Популярные бренды