Installing and removing server components
Safety instructions
WARNING:
Whenever you need to lift the system, get others to assist you. To avoid injury, do not attempt to lift the system by
yourself.
WARNING:
Opening or removing the system cover while the system is powered on may expose you to a risk of electric shock.
CAUTION:
Do not operate the system without the cover for a duration exceeding five minutes.
CAUTION:
Many repairs may only be done by a certified service technician. You should only perform troubleshooting and simple
repairs as authorized in your product documentation, or as directed by the online or telephone service and support team.
Damage due to servicing that is not authorized by Dell is not covered by your warranty. Read and follow the safety instructions
that are shipped with your product.
CAUTION:
Operating the system without the system cover can result in component damage.
NOTE:
Dell recommends that you always use a static mat and static strap while working on components inside the system.
NOTE:
To ensure proper operation and cooling, all bays in the system and system fans must be populated always with a
component or with a blank.
Before working inside your system
Prerequisite
Follow the safety guidelines listed in Safety instructions.
Steps
1
Turn off the server, including any attached peripherals.
2
Disconnect the system from the electrical outlet and disconnect the peripherals.
3
If applicable, remove the system from the rack.
For more information, see the Rack Installation placemat at
.
After working inside your system
Prerequisite
Follow the safety guidelines listed in Safety instructions.
Steps
1
If applicable, install the system into the rack.
For more information, see the Rack Installation placemat at
.
2
Reconnect the peripherals and connect the system to the electrical outlet.
3
Turn on the system, including any attached peripherals.
4
Installation and Service Manual
Installing and removing server components
15
Содержание DSS 9000J
