Deliberant DLB27 Series, Руководство пользователя

Страница: 52 / 65

51
Management Configuration
Quality of Service (QoS)
QoS allows you to specify some rules, to ensure the quality of service in your network, such as Bandwidth Priority to allocate
bandwidth. This function can be helpful in shaping and queuing traffic from LAN (WLAN) to WAN or LAN to WLAN, but not
WLAN to WLAN.
Enable the QoS and then fill in the Bandwidth Ratio (H/M/L). The device has three Bandwidth Priorities High, Medium and
Low. The user can allocate Bandwidth among these and the default is High:50
％
, Medium:30
％
and Low:20
％ .
The following table describes the priorities that you can apply to bandwidth.
Priority Level Description
High Typically used for voice or video applications that is especially
sensitive to the variations in delay.
Medium Typically used for important traffic that can tolerate some delay.
Low Typically used for non-critical traffic such as a large number of
transfers but that should not affect other application.
Click the QoS link under Management to open the QoS Setting page. This page is divided into three parts: basic settings, QoS
rule settings, and current QoS setting table.
Enable QoS and enter Max Throughput (default 20Mbps)
、
Bandwidth Ratio (default H:50
%,
M:30
%,
L:20
%
)
Label Description