Deliberant DLB27 Series Скачать руководство пользователя страница 58

Страница: 58 / 65

Upgrade Firmware

Firmware Types

The firmware for this device is divided into 2 parts, one is web pages firmware the other is application firmware, usually named

g120webpage.bin and g120linux.bin. To upgrade the firmware, we suggest the user first upgrade the application firmware then

the web pages firmware.

Upgrading Firmware

The Web-Browser upgrading interface is the simplest and safest way to upgrade the firmware. It will check the firmware

checksum and signature, and the wrong firmware won

‟t be accepted. After upgrading, the device will reboot.

WARNING:

Older versions of the firmware may cause the device configuration to be restored to the factory default setting

upon rebooting and the original configuration data will be lost!

To upgrade the firmware, just enter the file name with full path and click the

“Upload” button.

Memory Limitation

To make sure the device has enough memory to upload firmware, the system will check the capacity of free memory. If the

device lacks enough memory to upload the firmware, please temporarily turn-off some functions then reboot the device to get

enough memory for firmware uploading.

Save/Reload Settings

Reset Setting to Factory Default Value

Since the device is designed for outdoor use, there is no interface outside the housing to reset the configuration value to the

factory default value. The device provides the Web-Browser interface to reset the configuration data. After resetting it, the

current configuration data will be lost and restored to factory default value.

Содержание DLB27 Series


































































Результаты поиска

Содержание DLB27 Series

Отзывы:

Похожие инструкции для DLB27 Series

Бренды по названию

Популярные бренды

Deliberant DLB27 Series, Руководство пользователя

Результаты поиска

Содержание DLB27 Series

Отзывы:

Похожие инструкции для DLB27 Series

Бренды по названию

Популярные бренды