Part Number: 9291460 11/17
15
DANGER
The on-site supervisor is responsible for ensuring that
operators are made aware of the inherent dangers of
operating this equipment.
DANGER
Do not operate any appliance with a damaged cord
or plug. All repairs must be performed by a qualified
service company.
DANGER
Never stand on the unit! They are not designed to
hold the weight of an adult, and may collapse or tip if
misused in this manner.
DANGER
Keep power cord AWAY from HEATED surfaces. DO NOT
immerse power cord in water. DO NOT let power cord
hang over edge of table or counter.
n
Warning
Do not contact moving parts.
n
Warning
The operator of this equipment is solely responsible
for ensuring safe holding temperature levels for all
food items. Failure to do so could result in unsafe food
products for customers.
n
Warning
Do not use electrical appliances or accessories other
than those supplied by the manufacturer.
n
Warning
All covers and access panels must be in place and
properly secured, before operating this equipment.
n
Warning
Damp or wet hands may stick to cold surfaces.
n
Warning
Maximum weight for shelves is 75 pounds. Overloading
shelves can damage equipment or cause bodily injury.
n
Warning
Do not block the supply and return air grills or the air
space around the air grills. Keep plastic wrappings,
paper, labels, etc. from being airborne and lodging in
the grills. Failure to keep the air grills clear will result in
unsatisfactory operation of the system.
,
Caution
Do not throw items into the display case or storage
area. Failure to heed this recommendation could result
in damage to the interior of the cabinet or to the blower
coil.
Refrigerated Display Cases
Delfield display cases are designed to maintain 36°F to 40°F
(2°C to 4°C) operational temperature in both the display
and storage areas (F15 series only) at 55% or lower ambient
relative humidity.
Notice
If humidity is above 55%, condensation on the glass will
be present.
Display Lock Operation
At the factory, the keys are taped to the display case.
To lock: Line up key ridge with red dot.
Insert key and rotate one-half turn.
Remove key and push lock bolt in.
To open: Line up ridge with red dot.
Insert key and rotate key one-half turn.
Remove key.
Section 3
Operation
