Delfast Top 3.0, Руководство пользователя

Страница: 13 / 59

14
Throttle/PAS Switch positions:
I – Throttle mode activated;
0 – Pedal mode activated;
II – PAS mode activated.
WARNING! When you select in the pas (pedal assist) mode, be careful when using the
pedals. The e-bike can accelerate and the loss of control can cause injury.
WARNING! Do not make sharp turns on the e-bike, when moving with the motor on.
The loss of control can cause injury.
To minimize battery usage, start your bike’s movement pedal mode and then activate
the electric drive (either throttle or PAS mode) drive. This significantly (by 15–25%)
increases the mileage driven between recharges, since it is at
the beginning that the bicycle with the motor consumes the
most electricity/energy.
After starting the initial movement of the e-bike in one of the above ways, to continue to use
the motor, simply turn the accelerator handle “throttle”, located on the right side of the steering
wheel, in the “toward you” position and continue driving. By increasing or decreasing the angle
of rotation of the accelerator around its axis, you can smoothly adjust the speed of a bicycle
with a motor.
You can regulate the speed of the e-bike when the motor is turned on by periodically using the
pedals. With every pedal rotation with your feet, the motor will either connect, or increase
power and help the bicycle move as you pedal.
This mode of movement on a e-bike with a motor (PAS) is the most economical mode for
battery power consumption. In addition, pedaling the e-bike with your feet is very effective in
preserving power when driving on sand, dirt, gravel, and especially when driving uphill.
For your safety, slow down before turns. Do not, or use minimal, acceleration with the throttle
during any turn. Take all turns at low speeds in order to stay safe for yourself and for others.
In order to get the maximum possible distance on a single battery charge, it is recommended
to observe the following rules:
1. Avoid unreasonable braking and complete stops. Accelerating consumes a lot of battery
power.
2. Accelerate evenly. Try to move at the medium speed.
3. To reduce speed, release the throttle in advance of braking, instead of using the brake, if
possible. Be careful and alert when doing this.
4. When driving uphill, in strong winds, on a dirt road, or with a heavy load, move at the
medium speed.
5. In addition to the above factors, many other conditions affect the distance of the e-bike on a
single charge: the load on the e-bike, tire pressure, road gradient, road surface quality,
ambient temperature, etc.
Throttle / PAS Switch
Speed Limit Switch