Delfast Top 3.0, Руководство пользователя

Страница: 11 / 59

12
Charging the battery
Seat Adjustment
Your Delfast Top 3.0 has a high-quality new generation lithium-ion battery. After turning on the
e-bike, check the battery charge level on your e-bike’s display screen.
Charging the bike will take approximately 6 hours. Be sure to fully charge the battery before
operating your e-bike for the first time. To charge your bike:
●
Insert charger cable into the e-bike’s charging socket, then connect the charger to a
power source.
●
Install the battery and charger out of the reach of children.
●
Do not cover the charger with flammable or any other objects.
●
To prevent electric shock, never disassemble the charger.
●
Do not allow liquids or metal objects into the charging device.
●
WARNING: Do not use the supplied battery charger to charge batteries from other
manufacturers or to charge any other types of batteries.
Charging at any time, even after a partial discharge (e.g., after a short distance of a few
kilometers) is possible.
The main display is equipped with a charging indicator:
●
Red color: Battery is currently charging
●
Green color: Battery is fully charged
If the battery charge indicator does not change color for a long time, lights up red, the battery
pack has an elevated temperature, and/or an abnormal smell has started during charging —
this indicates the charger cable or battery has been damaged. Disconnect the charger cable
and take it to a repair shop.
For convenience and maximum safety when driving an e-
bike it is important to adjust your seat to an appropriate and
comfortable fit. To do this, set your bike seat to the height
that sitting and holding the handlebar grips of a bicycle,
allows you (the driver) to touch the ground with your feet.
Seat adjustment and tilt steering adjustment similar to the
adjustment on a regular MTB/mountain or street bike. Simply
adjust the seat height and tilt the handlebars in the preferred
position. Be careful to not exceed the maximum height safety
line that is indicated on the seat pillar and handlebars.
*If your e-bike is equipped with a motorcycle saddle it is already adjusted to the optimum
position at the factory. Additional saddle adjustment is not required.