manualshive.com logo in svg

Delem DA-66T, Справочное руководство, Страница: 199 / 218

Поделиться
Скачать
Delem DA-66T Скачать руководство пользователя страница 199

V0913, 10.39

Tap Edit Drawing to make the backgauge drawing appear wherein the dimensions of the back 
gauge finger can be programmed.

The following parameters describe the dimensions of the back gauge and the lay-on positions. 
The number of parameters that has to be programmed depends on the number of gauge 
positions. If more gauge positions are programmed, more parameters are offered. The 
illustration at the bottom of the screen will change according to the number of gauge positions.

Finger height

The height (or thickness) of the first back gauge finger tip.

Gauge height

The height of the different finger levels.

Finger length

The length of the first finger level.

Gauge length (L2/L3)

The length of additional lay-on levels.

Gauge length (L1)

The length of the finger level at the bottom of the gauge.

Содержание DA-66T



























































































































































































































Отзывы:

Нет отзывов