manualshive.com logo in svg

DeLaval VMS 2008, Инструкция

Поделиться
Скачать
DeLaval VMS 2008 Скачать руководство пользователя страница 180

Troubleshooting

DeLaval voluntary milking system VMS

94897201.pdf

2007-12-18

M

m

Alarm text

Type

Meaning

Action

M

m

Alarm text

Type

Meaning

Action

2

206

Robot is not
properly
configured

Stop alarm

The parameters for the software
operating the arm are invalid.
Normally, this error should never
occur.
A possible cause might be that the
parameters in the database were
not successfully transferred to the
milking station (however, this is an
internal error and should never
occur).

Restart the milking station. If the problem
persists, contact service engineer.

2

206

Robot is not
properly
configured

Stop alarm

The parameters for the software
operating the arm are invalid.
Normally, this error should never
occur.
A possible cause might be that the
parameters in the database were
not successfully transferred to the
milking station (however, this is an
internal error and should never
occur).

Restart the milking station. If the problem
persists, contact service engineer.

2

207

Invalid teat
positions,
not teached?

User
notification

The cow has invalid start positions
(teat positions). The cow  may be
new to the system.
The message includes the cow
number.
If this occurs in automatic mode,
the cow will be released and the
station continue with the next cow.

Determine ("teach") the start positions for
the cow.

2

207

Invalid teat
positions,
not teached?

User
notification

The cow has invalid start positions
(teat positions). The cow  may be
new to the system.
The message includes the cow
number.
If this occurs in automatic mode,
the cow will be released and the
station continue with the next cow.

Determine ("teach") the start positions for
the cow.

2

208

Invalid
teatcup
positions,
not teached?

Stop alarm

The robot cannot fetch the
teatcups because one or more of
the cup positions are invalid.

Determine ("teach") the positions of the
teatcups.

2

208

Invalid
teatcup
positions,
not teached?

Stop alarm

The robot cannot fetch the
teatcups because one or more of
the cup positions are invalid.

Determine ("teach") the positions of the
teatcups.

2

209

Invalid
cleaner
position, not
teached?

Stop alarm

The robot cannot fetch the teat
preparation cup because its
position is invalid.

Determine ("teach") the position of the teat
preparation cup.

2

209

Invalid
cleaner
position, not
teached?

Stop alarm

The robot cannot fetch the teat
preparation cup because its
position is invalid.

Determine ("teach") the position of the teat
preparation cup.

2

210

Invalid hold
milktubes
position

Stop alarm

The robot cannot support the milk
tubes because the holding position
is invalid. In automatic mode, the
cow is milked and released before
the alarm is issued.

Contact service engineer.
 Service engineer only:
- Park the robot.
- Start the management software (VMS
Config) and adjust the holding postion.

2

210

Invalid hold
milktubes
position

Stop alarm

The robot cannot support the milk
tubes because the holding position
is invalid. In automatic mode, the
cow is milked and released before
the alarm is issued.

Contact service engineer.
 Service engineer only:
- Park the robot.
- Start the management software (VMS
Config) and adjust the holding postion.

2

213

Robot self
test failed

Stop alarm

Some problem for the robot arm to
perform  selftest.

Start another selftest and try to see if
something is stopping the arm. If not
possible to solve, call serviceman.

2

213

Robot self
test failed

Stop alarm

Some problem for the robot arm to
perform  selftest.

Start another selftest and try to see if
something is stopping the arm. If not
possible to solve, call serviceman.

172(198)

Содержание VMS 2008















































































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды