DEL TIXIT, Технические инструкции

Страница: 27 / 32

27
I 0 II
I 0 II
Use
OPENING/ CLOSURE OF THE POOL
ALWAYS KEEP AN EYE ON THE POOL DURING OPENING OR CLOSING OPERATIONS.
ALWAYS CHECK THAT THE POOL WATER LEVEL IS CONSTANT AND COMPLIANT WITH THE
RECOMMENDATIONS ON THE INSTRUCTIONS
- It is imperative not to halt the cover in an intermediate position, this can cause the risk of jamming a bather’s body
under the cover casing, if a bather uses the pool.
- When using an automatic cleaner under the cover, check that the hose does not affect the movement of the slats
when opening and closing the cover.
- It is essential to remove floating objects when opening and closing the cover.
- Do not block the cover while extending or retracting.
- Do not activate the automatic cover when it is iced in.
- The opening or closure operation requires about 2 minutes for one person and about 3 minutes to lock or unlock
the attachment kits.
Opening: Always release the cover before starting the motor.
- Unlock all the fastening systems.
- Operate the open control.
- Stow the unlocking tools out of the reach of children.
- Lock the WI-Key command
Closure:
- Operate the close control
- Lock all the fastener systems.
- Stow the unlocking tools out of the reach of children.
- Lock the WI-Key command
When closing the pool, it is essential to KEEP THE CONTROL PRESSED FOR AT LEAST 3 SECONDS. This is
required to guarantee automatic obstacle detection the next time the cover is opened.
IMPORTANT
Locking
Pilot
Closure
Opening
Stop
LOCKING THE WI-KEY
• Press on for more than 3 seconds
until the pilot flashes
= system locked
UNLOCKING THE WI-KEY
• Press and keep it pressed.
• At the same time: successively press
the following 3 keys: :
• The pilot remains on = emitter unlocked
LIGHT INDICATORS
Wi-key unlocked
Wi-key locked
Battery level low
Change the batteries (2 x LR03)
Green LED
Red/green flashing LED
Orange LED
Red LED
When you press a key, the light indicators below provide information on the Wi-key status (locked/unlocked), as well
as the battery charge level.
Never place products that were not designed for the purpose on slat covers, as this may warp the slats.
Never leave objects on the cover (towels, buoys, etc.) because, in direct sunlight, the slats would be locally expanded
and the warranty would be void.
«Solar polycarbonate slats are incompatible with bromine treatments and treatments containing bromine.
Do not put undiluted chemical products in direct contact with solar polycarbonate slats (e.g. algae protection products).
It is essential to first carry out a test on a small surface area).»