DEL TIXIT, Технические инструкции

Страница: 21 / 32

21
1 2 3 4
O F
1 2 3 4
1 2 3 4
1 2 3 4
1 2 3 4
1 2 3 4
1 2 3 4
1 2 3 4 1 2 3 4
1 2 3 4
1 2 3 4 1 2 3 4
1 2 3 4
1 2 3 4 1 2 3 4
1 2 3 4
1 2 3 4 1 2 3 4
1 2 3 4
1 2 3 4 1 2 3 4
1 2 3 4 1 2 3 4
I 0 II
I 0 II
Installation
Activating the automatic switch
Adjusting the trigger sensitivity
Test
To know
activated
A - Block the cover by hand or with the fixture kits
and keep the pool in sight when opening the cover.
Closing
Closing
=> The motor is automatically stopped.
(If necessary adjust the sensitivity of the switch activation)
+
of 3 sec
-
of 3 sec
Failure to activate the automatic switch can cause
serious damage to the motor, the control box, the
slats and void the warranty.
l
<= 3 m
l
<= 3,5 m
l
<= 4 m
l
<= 4,5 m
l
<= 5 m
Maximum
sensitivity
Minimum
sensitivity
If
you experience
unexplained
activations, reduce the sensitivity
level by selecting the setting for the next width up.
l
= pool width
SWITCH PROG SWITCH REGLAGE
Protected opening
Non-protected opening
The automatic cover stops during the pool opening:
1 - Stop due to a real blocking: unlocking of locking kit oversight or other...
- Close during more of 3 seconds until release completely slats tension.. The
next opening will stay protected by the system .
- Eliminate the blocking cause(s) and go again with the pool opening.
2 - Untimely stop:
- Close during 1 to 3 seconds .
he next opening won’t stay protected by the system
- Go again with pool opening.
- In case of untimely activations, decrease the sensitivity of the card.
- In case of too important effort before activations, increase the sensitivity of
the card. “Sensibilité de déclenchement” parameter
If there are unplanned activations, reduce the
sensitivity level by selecting the setting for the next
bigger width.
card
activated
Opening, control in progress
Opening without control
Closure
Protection ON
Test