2. Front panel, push-buttons, LEDs and display
2.1 Front panel
2.1.1 Front panel drawing
The drawing below shows the CGC 200 front panel.
2.2 Push-buttons
2.2.1 Push-button functions
The push-buttons on the front panel have the following functions:
Button
Description
Function
Stop
●
Stops the engine and changes the mode to
Stop
if the genset is running.
●
Resets the alarms if there is a shutdown alarm.
●
Tests all the LEDs and the full LCD display if pressed for more than three
seconds in
Stop
mode.
●
Changes the mode to
Manual
, if in
Auto
mode.
Start
●
Starts the engine (
Manual
mode only).
●
Changes the mode to
Manual
, if in
Auto
mode.
Auto mode
Changes from
Manual
to
Auto
mode.
Page down
Pages down, to show other operating values.
The push-buttons on the front panel can also be used to change the controller parameters. This is described
later in this manual.
CGC 200 Operator's manual 4189340770
UK
Front panel, push-buttons, LEDs and
display
DEIF A/S
Page 7 of 43
