9
©
1999 Directed Electronics, Inc.
To enter or exit Valet
®
Mode with the Valet
®
switch:
Turn ignition to the “on” position
and then to the “off” position.
Press and release the Valet
®
switch
within 10 seconds. The status LED
will light solid if you have entered
Valet
®
Mode. The LED will turn off
when exiting Valet
®
Mode.
If you are threatened in or near your vehicle, you can attract
attention by triggering the system with your transmitter! Just
press
for 1.5 seconds, and you will enter
Panic Mode
. The
horn will honk and the parking lights will flash for 30 seconds. To
stop Panic Mode at any time, press
on the transmitter.
NOTE
: In order for Panic Mode to function, the vehicle’s horn (or option-
al siren) as well as the vehicle's parking lights must be connected.
Rapid Resume Logic
This system stores its current state to non-volatile memory. If power
is lost and then reconnected the system will recall the stored state
from memory. This means if the unit is in Valet
®
Mode and the bat-
tery is disconnected for any reason, such as servicing the car, when
the battery is reconnected the unit will still be in Valet Mode. This
applies to all states of the system, including arm and disarm.
Panic Mode
DRW-35
