24.03.2017
ASSEMBLY AND OPERATING MANUAL DEGERtracker D60H, D80, D100
Page 9
2.3.3
Safety notes
The safety notes in the individual sections must be strictly followed.
ATTENTION!
DEGERener
gie cannot be held responsible for systems that are not constructed in accordance with
the module configuration layout provided by DEGER together with the order confirmation!
The total module surface is determined in a location related manner with the DEGER planning tool
and must under no circumstances be exceeded.
The dimensions specified in the module configuration layout must be complied with.
ATTENTION!
Once the photovoltaic modules have been mounted on the DEGERtracker, the module surface
must remain in horizontal (SAFE) position.
Operation of the DEGERtracker must only be started, after the wind monitor has been installed and
its function has been checked.
2.3.4
Qualification of persons
All work on the DEGERtracker must be performed by expert personnel, unless other persons have been
specified in the table below.
Apart from a completed education in the specified field, this expert personnel must evidently possess the
following knowledge:
Activities
Person
Qualification
Knowledge
Transport,
storage
Forwarder,
assembly personnel
-
Proof of load-securing training
- Secure use of hoisting gear and lifting tackle
Preparation of
foundation, concrete
Expert personnel
- Knowledge about the reinforcement of foundations
- Secure use of hoisting gear and lifting tackle
Preparation of
foundation, DEGER
Steel foundation
Expert personnel
- Secure use of tools
- Secure use of hoisting gear and lifting tackle
- Product specific knowledge
Expert personnel
Suitable expert personnel with basic
technical education must be made
available for the mechanical assembly
and disassembly of the system.
- Secure use of tools
- Secure use of hoisting gear and
lifting tackle
- Product specific knowledge
Suitable expert personnel with basic
electrical education must be made
available for the electric assembly,
commissioning and putting out of service
of the system.
- Routing of electric cables
- Assembly of terminal blocks, line protection breakers,
electric components, etc.
- Measuring the effectiveness of electrical
protective measures
- Product specific knowledge
Expert personnel
Suitable expert personnel with profound
technical eduction in the fields of
electrical engineering and mechanics
must be made available.
- Safe handling of tools,
- Routing of electric cables
- Assembly of terminal blocks, line protection breakers,
electric components, etc.
- Measuring the effectiveness of electrical protective
measures
- Product specific knowledge
Handling, operation,
operating supervision,
simple maintenance,
fault remedy
Owner,
user
- Product specific knowledge
Waste disposal
Expert personnel
- Correct and environmentally friendly
disposal of materials and substances
- Decontamination of pollutants
- Knowledge about recycling
Assembly,
commissioning,
disassembly
Operation,
maintenance,
repair,
troubleshooting
