Speed change tuning only can be used on page 9.
Speed change tuning not only will increase the scan speed,
but also will not miss the weak stations.
1. Press POWER button to turn on the unit.
2. Turn to Page 9.
3. till
appears in the display.
4. Hold down SCAN+ or SCAN- button, frequency changes in
the step of 1K, the scan speed is changed from slow to fast,
when a strong signal is searched, signal strength indicator
appears, the scan speed decrease, then the speed will increase
again to continue auto scan.
Direct Frequency Entry
Direct frequency entry makes it extremely easy to tune
into a station that you knows its exact frequency.
8
9
8
Example 2: To enter SW6.255MHz
Example 1: To enter FM89.80MKz,
or
You must go to next step in 6 seconds, otherwise the
unit will exit direct entry mode.
If the last frequency number is 0, you can press ENTER
button to supersede input 0.
8
9
8
ENTER
0
6
2
5
5
ENTER
ENTER
ENTER
11
12
9
If a wrong number is entered, press EXIT button to clear it.
If an invalid frequency is entered,
ERR
will flash in the
display.
Press EXIT button can exit from frequency entry immediately.
Before manual scan or auto scan, you can use quickly input
function to quickly go to a frequency range.
Example: The frequency range of FM is 70.00-108.00MHz,
if you enter 100MHz, you can :
1. Select FM band.
2. Press ENTER button.
3. Press number 1, then press ENTER button,
100.00MHz will display.
Quickly Input
1. Press POWER button to turn on the unit.
2. Select the desired band.
3.
from the display for 6 seconds.
4. Press the number button with complete frequency,
the unit will tune into the entered frequency.
6
Press ENTER button , the frequency disappears
DE1102
1
2
3
DEL
CHARGE
SCAN
AM:
W/N
POWER
VOL
S
.
STRENGTH
FM ST
FM:
ST/MONO
PLL FM STEREO/MW.SW DUAL CONVERSION
SYNTHESIZED WORLD RECEIVER
190
Ö Ç
Ä Ü
³ ä
µ ç
³ ¬Ö ص ÍÒ ô
/
Ð Å
º Å
Ç ¿
¶ È
Ö ¸
Ê ¾
2
ENTER
EXIT
M/
LOCK
FM/BASS
MW
SW/METER
SSB/190MEMORY/ATS
1.
2.
3.
4.
