27
28
LOCK FUNCTION
The lock function can be used to avoid any accidental
operation when the unit is being carried or used.
Hold down LOCK button for 2 seconds till appears in
the display, lock function is activated, all buttons except
LOCK button become inoperative.
Hold down LOCK button for 1 second to cancel lock function.
disappears from the display.
M/LOCK
M/LOCK
AUTO RESET
BACKLIGHT FUNCTION
There are 3 kinds of back light mode to select: normal,
always-on and backlight off.
1. Normally, press any button in dark place will start up the
backlight of the display and buttons. The backlight will
turn off automatically if no further operation in 8 seconds.
2. When the backlight is illuminated, connect the AC adaptor
will remain the illumination. Disconnect the AC adaptor, the
backlight will off and return to normal mode.
3. With the unit turned off, if you hold down the backlight
button for 0.5 second, the backlight will off. Hold down
again to resume.
Backlight consumes little battery power.
If the unit operates erratically, just remove the batteries or
disconnect the AC adaptor for about 30 seconds, then
insert the batteries or connect the AC adaptor, the unit will
resume to normal operation.
Reset function will not erase all of the memories except
the clock time and beep setting.
12
9
20
20
WIDE / NARROW BAND
Press AM: W/N button repeatedly to select wide band or
narrow band when listening MW or SW broadcasting.
Wide band has a better tone reception than narrow band, but
it is noisier than narrow band reception.
STEREO / MONO / BASS
Stereo/ Mono: stereo is suitable for strong signal music
broadcast, mono is suitable for weak signal
and voice program.
News / Music: push the switch to corresponding position
when listen news or music.
Bass: it is more suitable for strong signal stereo music
broadcast. If you listening radio with speaker,
keep the BASS function off.
