1. Slide the battery lid.
2. Insert three AA batteries with
correct polarity as shown in
the compartment.
3. Close the lid of compartment.
OPERATING ON BATTERY
When the unit is not being used for a long period of time,
remove the batteries to avoid damage from battery leakage
and corrosion.
If battery leakage occurs, wipe the battery compartment
with a soft cloth before inserting new batteries.
OPERATING ON AC ADAPTOR
1. Plug the adaptor into an 220V AC power outlet.
2. Insert the adaptor s small connector plug into the DC
JACK , appears in the display.
3. Turn on the unit.
2
2
0
·ü
½»
Á÷
µç
²å
×ù
Disconnect external power source before operating on
battery power.
BATTERY REPLACEMENT
1. When the sound becomes weak and distorted, and battery
power indicates , replace batteries immediately,
otherwise will turn to , then the unit will shut off
automatically.
2. All memories (station presets) are permanently stored.
However, when the batteries are removed, the clock reverts
to the default setting of
12:00
and the last beep setting is
cancelled. They need to be reset.
POWER SOURCES
1
2
3
If the AC adaptor is connected, the unit automatically
switches to the AC adaptor power, and installed batteries
are no longer in use.
If the adaptor is connected while the backlight is
illuminated, the illumination will remain on.
Remove the batteries if you want to use AC adaptor for
a long period of time.
23
1
2
BATTERY INSTALLATION
Left Side
Do not try to recharge dry batteries.
Do not mix old batteries with new ones.
Remove the batteries if the unit will not be used for a
long period of time.
