17
ATS
ATS Preset
5
9
1. Turn on the unit.
2. Press page button , then press number 0 goes to page 0.
3. Select desired band.
4. Press SCAN button till STEP
If you don't want to start scan from current frequency, press
Enter button to input start frequency.
Check if there is already a preset number, press SCAN+ or
SCAN- button to clear it, the scanned stations will be stored
from no. 1, otherwise, the scanned stations will be preset after
that number.
7. Hold down SCAN+ or SCAN- button for 1 second, ATS function
runs. The unit begins to scan in ascending or descending order
from current frequency. When tuning into a station, It will store
on page 0 automatically. When 19 memories are full or scan
back to beginning frequency, scan stops.
18
( On Page O)
Repeat ATS
After a ATS operation, if the preset number is not full or some
scanned stations are unnecessary, you can delete some stations,
and repeat ATS operation.
1. Set the scan method to MEMO by press SCAN button till
MEM
2. Delete the unnecessary stations by memory scan. After deleting,
the unit will adjust the preset number automatically.
3. Press SCAN+/- to find the highest preset number.
4. Set the scan method to STEP by press SCAN button till STEP
appears in the display.
5. Hold down SCAN+ or SCAN- to repeat ATS operation, till all
stored stations are satisfied to you.
DE1102
1
2
3
DEL
CHARGE
SCAN
AM:W/N
POWER
VOL
S
.
STRENGTH
FM ST
FM:ST/MONO
PLL FM STEREO/MW.SW DUAL CONVERSION
SYNTHESIZED WORLD RECEIVER
190
Ö Ç
Ä Ü
³ ä
µ ç
³ ¬Ö ص ÍÒ ô
/
Ð Å
º Å
Ç ¿
¶ È
Ö ¸
Ê ¾
2
ENTER
EXIT
M/LOCK
FM/BASS
MW
SW/METER
SSB/190MEMORY/ATS
1.
6.\7.
2.
3.
4.
5.
