Page 17
4 Preparation
Tips for energy saving
The following information will help you to use your
appliance in an ecological way, and to save energy:
x
Defrost frozen dishes before cooking them.
x
Use pots/pans with cover for cooking. If there is no
cover, energy consumption may increase up to 4
times.
x
Select the burner which is most suitable for the
bottom size of the pot to be used. Always select
the correct pot size for your dishes. Larger pots
require more energy.
Initial use
First cleaning of the appliance
The surface may get damaged by some
detergents or cleaning materials.
Do not use aggressive detergents,
cleaning powder/cream or any sharp
objects.
1. Remove all packaging materials.
2. Wipe the surfaces of the appliance with a damp
cloth or sponge and dry with a cloth.
Package information
Packaging materials are dangerous to children. Keep
packaging materials in a safe place out of reach of
children.
Packaging materials of the appliance are
manufactured from recyclable materials.
Do not dispose of the packaging materials together
with domestic or other wastes. Dispose of them in a
responsible manner.
Future Transportation
Keep the appliances original carton and transport the
appliance in it. Follow the instructions on the carton. If
you do not have the original carton, pack the
appliance in bubble wrap or thick cardboard and tape
it securely.
Secure the caps
and pan supports with
adhesive tape.
Check the general appearance of your
appliance for any damages that might
have occurred during transportation.
Disposing of the old product
Dispose of the old appliance in an environmentally
friendly manner.
Refer to your local dealer or solid waste collection
centre in your area to learn how to dispose of your
appliance.
Before disposing of the appliance, cut off the power
cable plug and make the door lock (if any) unusable
to avoid dangerous conditions to children.
IMPORTANT:
If the gas type of the appliance is
changed, then the sticker that is
currently on the underside of the
appliance that reads
“Factory adjusted
for LPG gas”
must be replaced by the
sticker
“Adjusted for natural gas”.
The new sticker can be found in the gas
jet kit supplied with the appliance.
Natural gas installation
x
There must be a rigid or semi rigid pipe, (i.e. steel
or copper) at the outlet of the installation for the
natural gas connection of your product and the tip
of this pipe must be closed with a blind plug.
Service Representative will remove the blind plug
during connection and connect your product by
means of a straight connection device (coupling).
x
There must be a flex pipe at the outlet of the
installation for the natural gas connection of your
product and the tip of this pipe must be closed with
a blind plug. Service Representative will remove
the blind plug during connection and connect your
product by means of a straight connection device
(coupling).
x
Make sure that the natural gas valve is readily
accessible.
x
If you need to use your product later with a
different type of gas, you must consult the
Authorised Service Agent for the related
conversion procedure.
