Page 9 of 24
Installation
Surfaces, synthetic laminates and adhesives
used must be heat resistant (100 °C
minimum).
The worktop must be aligned and fixed
horizontally.
Cut aperture for the hob in worktop as per
installation dimensions.
Product must be installed by a qualified
person in accordance with the regulations in
force. The manufacturer shall not be held
responsible for damages arising from
procedures carried out by unauthorized
persons which may also void the warranty.
Preparation of location and
electrical installation for the
product is under customer’s
responsibility.
The product must be installed in
accordance with all local
electrical regulations.
Prior to installation, visually check
if the product has any defects on
it. If so, do not have it installed.
Damaged products cause risks
for your safety.
Unpacking
•
Please ensure that packaging material is
disposed of in a responsible manner.
•
Plastic bags should be cut up to prevent
children playing with them and
accidentally suffocating.
•
Some models feature a protective film
over stainless steel trim. This film must be
carefully removed before using the hob.
•
If the appliance is damaged in any way,
do not use it. Report the damage to your
dealer.
*Minimum height to extractor as recommend
in hood instruction manual. If not
recommended in the hood instruction
manual, this height should be at least 650
mm.
**Minimum distance between cabinetry must
be equal to width of hob
Before installation
The hob is designed for installation into
commercially available work tops. A safety
distance must be left between the appliance
and the kitchen walls and furniture. See
figure (values in mm).
It can also be used in a free standing
position. Allow a minimum distance of 750
mm above the hob surface.
(*) If a cooker hood is to be installed above
the cooker, refer to cooker hood
manufacturer' instructions regarding
installation height. If not defined any size in
the hood manual, this height should be at
least 650 mm.
Remove packaging materials and transport
locks.