Page 21
Damage of the control panel!
Do not remove the control knobs for
control panel cleaning.
Cleaning the oven / oven door
To clean the oven door, use warm water with washing
liquid, a soft cloth or sponge to clean the appliance
and wipe it with a dry cloth.
Don't use any harsh abrasive cleaners
or sharp metal scrapers for cleaning the
oven door. They could scratch the
surface and destroy the glass
Gas Jet Cleaning Procedure
Every six months the gas jets on your hob should
be cleaned to ensure continued efficient and safe
operation.
This may be done using a Gas Jet Cleaning Kit
which may be purchased from your nearest Defy
Service Centre.
The kit comprises of a sliding T-bar (A) a socket
(B) and a ‘Classic pin’ (C).
Fit the T-bar to the socket and remove the pot
stands, burner caps and burner bodies.
1. Insert the socket into the central tube of the burner
so that it locates over the brass gas jet at the
bottom of the tube.
2. Gently loosen the brass gas jet by turning the
socket in an anti-clockwise direction.
3. Carefully lift the socket and loosened brass gas jet
from the central burner tube.
4. Insert the Classic pin into central hole of the jet and
slide it up and down until the jet is free of
accumulated dirt.
5. Re-assemble in reverse order.
6. Clean all the burner jets in the manner described
above.
Oven door
(Only applies to models with removable oven door)
The oven door may be removed to improve
access to the oven for cleaning purposes.
1. Open the door fully to expose the hinges (A) on
either side.
2. Flip the hinge locking levers (B) to the upright
position.
3. Partially close the oven door and lift it free of the
side panel retaining slots.
4. After cleaning, re-fit the oven door in reverse order
making sure that the bottom hinge notches ©
locate properly onto the bottom edges of the side
panel retaining slots.
SIDE OF DOOR
SIDE OF DOOR
A
1
2
B
S
ID
E
O
F
D
O
O
R
C
3
