2
14
15
23
27
9
11
12
22
20
16
18
10
1
2
3
4
5
6
7
8
19
24
25
26
28
13
21
17
2
2 Remote Control
2.1 Key introduce
1) MUTE: Mute or Restore Audio Output.
2) INFO: Displays additional channel information.
3) TTX: Displays Teletext Information.
4) SUBTITLE: Selects Subtitles Language.
5) EXIT: Exits the current Menu or returns to the previous Menu.
6) OK: Confirms an entry or selection. Displays the list of channels.
7) RIGHT / LEFT: Navigates through the Menus. Increases or decreases
volume.
8) TV/RADIO: Switches from TVfunction to Radio function and from Radio
to TV.
9) RECALL: Used to switch between the last two viewed channels.
10) GOTO: Selects the play time of media.
11) PREV: Skips to the previous track during playing media.
12) NEXT: Skips to the next track during playing media.
13) REPEAT: Selects Repeat or turn off Repeat mode.
14) STOP: Stops media play.
15) STANDBY: Switch the product to on or standby.
16) EPG: (Electronic Program Guide)Turns the program guide on.
17) AUDIO: Selects an Audio Language or Audio Mode.
18) UP / DOWN: Navigates through the Menus. Selects the next or previous
Channel.
19) MENU: Turns on Main Menu.
20) FAVOURITE: Turns on Favourite Menu.
21) 0-9 (Numeric Buttons): Selects a channel or setting.
22) FWD: Searches forwards during media play.
23) REV: Searches backwards during media play.
24) PLAY: Starts or resumes media play.
25) PAUSE: Pauses media play.
26) COLOUR BUTTONS:
RED: Find function;
GREEN: witch resolution;
YELLOW: Switch aspect ratio;
BLUE: Timer setting;
27) ASPECT: Installs Format of Video;
28) PAG+/- : Changes the page.
2.2 Installing the Batteries
Remove the battery cover from the Remote Control and put 2xAAA size
batteries inside the compartment. The diagram inside the Battery
Compartment shows the correct way to install the batteries.
2.3 Using the Remote Control
To use the Remote Control, point it towards the front of the Digital Set Top
Box. The Remote Control has a range of up to 7 metres from the Set Top
Box at an angle of up to 60 degrees. The Remote Control will not operate if
its path is blocked. Sunlight or very bright light will decrease the sensitivity of
the Remote Control.
