TEX-BAR-MAN-15V05 (0903)
Copyright © 2015 Defi ne Instruments
16
B
_ _ _ LOW SCALE VALUE FOR ANALOG OUTPUT
scrolls across the display and
toggles with the currently selected low scale display value. Use the
and
buttons to enter your cal low position, and then press
.
C
_ _ _ HIGH SCALE VALUE FOR ANALOG OUTPUT
scrolls across the display and
toggles with the currently selected high scale display value. Use the
and
buttons to enter your cal high position, and then press
.
D
_ _ _ CALIBRATE ANALOG OUTPUT?
scrolls across the display and toggles with
SKIP
. Press
to skip, or the
button and then
to
ENTER
and calibrate
your analog output.
Factory analog output calibration is precisely set before shipping this instru-
ment, and should not be adjusted unless advised by the manufacturer.
If you selected
ENTER
, connect a mA or volt meter across the analog
output connector (see 3.4), and then continue to 6.5E.
If you selected Skip, skip to 6.6 now.
E
_ _ _ CAL LOW ANALOG OUTPUT
scrolls across and toggles with a calibration
number, displayed in internal units (mA/V). Using the
and
buttons, cali-
brate your low analog output as required, and press
.
F
_ _ _ CAL HIGH ANALOG OUTPUT
scrolls across and toggles with a calibration
number, displayed in internal units (mA/V). Using the
and
buttons, cali-
brate your high analog output as required, and press
.
6.6 - Serial setup
A
_ _ _ SERIAL SETUP
scrolls across the display and toggles with
SKIP
. If your
controller does not have a serial port installed, (or you do not wish to confi gure
your serial options now), please press
to skip to 6.7.
Otherwise, press the
button and then
to
ENTER
serial setup.
B
_ _ _ SERIAL MODE
scrolls across the display and toggles with the current serial
mode. Use the
and
buttons to choose between:
ASCII
(custom),
MDBS
(Modbus RTU), or
RNGRA
(Ranger A), and then press
.
