MER-MAN-14V01 (1002)
Copyright © 2014 Defi ne Instruments
9
4
SOFTWARE CONFIGURATION USING TOOLBOX
4.1 - Bridge Key
Install the ToolBox soft ware (see Section 3) before connecting the Merlin to your PC.
Then connect the Merlin to your computer's USB port using the Bridge Key (supplied sepa-
rately), as shown below. The interface cable connects to the USB programming jack on the
unit's back panel (see 5.3D). A USB extension cable is supplied for your use if required - this is
oft en used for convenience in accessing USB ports located at the back of the computer.
USB Bridge Key
Interface
Cable
USB Extension Cable
(If Necessary)
PC Connection
INSTALL SOFTWARE FIRST!
Merlin
Universal
Indicator
CAUTION
Risk of damage to equipment or PC
Ensure that all connections between the Bridge Key and your Merlin are secure. Connect-
ing your indicator with cables that are not fi rmly 'pushed in' will result in connection faults,
and in extreme cases could cause damage to your computer.
Always use the windows ‘Safely remove hardware’ function before unplugging the
Bridge Key from your computer.
