background image

 MER-MAN-14V01  (1002)

Copyright © 2014 Defi ne Instruments

27

B

APPENDIX B - WARRANTY & USER'S RESPONSIBILITY

Warranty

Defi ne Instruments warrants that its prod-
ucts are free from defects in material and 
workmanship under normal use and ser-
vice for a period of one year from date of 
shipment.

Defi 

ne Instruments’s obligations under 

this warranty are limited to replacement or 
repair, at its option, at its factory, of any 
of the products which shall, within the ap-
plicable period aft er shipment, be returned 
to Defi ne Instruments’s facility, transporta-
tion charges pre-paid, and which are, aft er 
examination, disclosed to the satisfaction of 
Defi ne Instruments to be thus defective.

The warranty shall not apply to any equip-
ment which shall have been repaired or 
altered, except by Defi ne Instruments, or 
which shall have been subjected to misuse, 
negligence or accident.

In no case shall Defi ne Instruments’s liabil-
ity exceed the original purchase price. The 
aforementioned provisions do not extend 
the original warranty period of any product 
which has been either repaired or replaced 
by Defi ne Instruments.

User’s Responsibility

We are pleased to off er suggestions on the 
use of our various products, by way of print-
ed matter, on our website, or through direct 
contact with our sales/application engineer-
ing staff .

However, since we have no control over the 
use of our products once they are shipped, 
NO WARRANTY, WHETHER OF MERCHANT-
ABILITY, FITNESS FOR PURPOSE OR OTHER-
WISE is made beyond repair, replacement, or 
refund of purchase price at the sole discre-
tion of Defi ne Instruments.

Users shall determine the suitability of the 
product for the intended application before 
using, and the users assume all risk and li-
ability whatsoever in connection therewith, 
regardless of any of our suggestions or state-
ments as to application or construction.

In no event shall Defi ne Instruments’s liabil-
ity, in law or otherwise, be in excess of the 
purchase price of the product.

Defi ne Instruments cannot assume respon-
sibility for any circuitry described. No circuit 
patent or soft ware licenses are implied. 
Defi ne Instruments reserves the right to 
change circuitry, operating soft ware, speci-
fi cations, and prices without notice at any 
time.

Содержание Merlin





























Отзывы: