Defiant G7X2D01AA, Инструкции и сборка

Страница: 17 / 19

10/24/22, 11:16 AM Defiant G7X2D01AA Instructions / Assembly
https://mans.io/files/fullviewer/825373 17/19
D. What should I
do if wrong code
was entered? 1. Press button once and continue to input code according to regular
procedures.
E. Can not delete
all User Codes.
1. Make sure the whole code entering process is completed within 10
seconds, otherwise the unit will time out.
2. Make sure the Programming Code has been entered correctly.
F. Can not add a
new User Code. 1. Make sure the whole code entering process is completed within 10
seconds, otherwise the unit will time out.
2. Make sure the Programming Code has been entered correctly.
3. The new User Code will not be accepted when the capacity is full. Try to
delete any or some existing User Codes and then add new one(s) again. A
User Code must be at least 4 to 6 digits.
QUESTIONS ANSWERS
G. "Auto lock" does not
function. 1. The batteries are low on power if the battery indicator keeps
flashing. Please replace with four new batteries for the best
performance. (Alkaline Batteries Only).
2. Please refer to 2 - ^ in the guide to enable the Auto-Lock
function.
H. Lockset is not able to
unlock / lock by keypad. 1. Make sure you have entered the correct User Code.
2. The battery is low if the battery indicator light keeps flashing.
Please replace with four new batteries.
3. Make sure the cable is firmly connected.
4. Check the cable for any damage that may have occurred during
installation.
5. Make sure the batteries are properly installed. (Alkaline
batteries only)
6. Check the strike plate to make sure it is properly aligned and
clear so the bolt can freely move in the hole.
I. Lockset is unable to reset. 1. Please refer to 2 - ^ in the user guide to restore factory settings
and reprogram all codes. Hold the set button until long beep over.
2. The battery is low if the battery indicator light keeps flashing.
Please replace with four new batteries. Hold the set button until
long beep over.
Your experience on this site will be improved by allowing cookies. Allow cookies