10/24/22, 11:16 AM
Defiant G7X2D01AA Instructions / Assembly
https://mans.io/files/fullviewer/825373
4/19
(/fullviews/1749761/1749761_files/1749761-8.jpg)
CARE and MAINTENANCE:
The following instructions should be followed to properly protect and maintain your lockset:
A. Remove locks, or do not install locks, prior to painting your door.
B. Periodically clean with mild soap and a soft cloth only.
C. Do not use any abrasives or chemical products containing alcohol, benzene, acids, and avoid
using sharp or abrasive objects to clean this lockset.
D. Do not allow any water or liquids into the lockset during installation.
2 Pre-installation – Tools Required / Hardware Included
(/fullviews/1749761/1749761_files/1749761-9.png)
(/fullviews/1749761/1749761_files/1749761-10.jpg)
(/fullviews/1749761/1749761_files/1749761-11.png)
^Prepare the door of the door jamb.
door jamb – use the strike plate as a template to drill the latch and screw holes and chisel
out the mortise. The strike plate must fit flush with the surface
Door jamb hole dimension a. 1-3/16"(30 mm) b. 1-9/64"(29 mm) c. 7/8"(22 mm)
Strike dimentions
d.
e. f.
Your experience on this site will be improved by allowing cookies. Allow cookies
