DEFENDERTECH DT-400Lan, Руководство пользователя

Страница: 19 / 24

START-UP AND TESTING
It is possible to test the machine independently from a connection to an alarm center.
It is possible to freely test the system using "drinking water" instead of the liquid with which the
fog is produced, from the appliance will come out a dry and transparent but "noisy" steam (at
the end of this operation remember to restore the liquid level to the 100% acting on DipSwitch
nr.4).
TECHNICAL INSTALLATION
START
• Once the machine is connected to the mains, activate the buffer battery, connecting the "flying"
cable to the respective free terminal.
• Make sure that the whole DIPSWITCH is properly set (see table on page 11).
• Give 220V power to the appliance
• ARM the appliance through "ARM" (see page 10), when it will be ready it will emit a BEEP of 3 "
• Operate the shot using "FOG" (see page 10)
To interrupt the "shot and pause" cycle, the device must be disarmed by opening the contact on
ARM.