DEFENDERTECH DT-400Lan, Руководство пользователя

Страница: 15 / 24

FUNCTIONING A FAILURE STATE SIGNALING VIA LED
ARMED
LED1
FIXED ON
ARMED APPLIANCE
SLOW FLASHING DISARMED APPLIANCE
FAST FLASHING
DISARMED APPLIANCE BUT WITH ACTIVE BURNER
PREHEATING FUNCTION (50% of maintenance)
HEATING
LED2
TURNED OFF ALL THE RESISTANCES OFF
FIXED ON ALL THE RESISTANCES SELECTED ON
CODED FLASHING
ONLY ONE RESISTANCE ON; THE NUMBER OF FLASHES =
RESISTANCE NUMBER
SHOT
LED3
TURNED OFF SHOT NOT ACTIVE
FIXED ON SHOT ACTIVE
ONE FLASH TO EVERY REARMAMENT OF THE MACHINE
WASH
LED4
TURNED OFF BURNER WASH NOT IN FUNCTION
FIXED ON BURNER WASH IN FUNCTION
ON FLASH TO EVERY REARMAMENT OF THE MACHINE
FORCED PAUSE
LED5
TURNED OFF THE APPLIANCE IS NOT IN THE FORCED PAUSE STATE
FIXED ON
THE APPLIANCE IS IN THE FORCED PAUSE STATE
(it will ignore every firing commands untili its end)
ONE FLASH FOR EVERY RIARMAMENT OF THE MACHINE
FAILURE
LED6
(RED)
TURNED OFF NO ALLARM
CODED FLASHING
N. 1 FLASH: LIQUID_LEVEL_ALARM
N. 2 FLAS: CARD_OVERHEATING_ALARM
N. 3 FLASH: BATERY_ABSENT_ALARM
N. 4 FLASH: DEFECTIVE_SONDE_ALARM
N. 5 FLASH: LACK_NETWORK_ALARM
N. 6 FLASH: BURNER_OVERHEATING_ALARM
N. 7 FLASH: PUMP_FAILURE_ALARM
N. 8 FLASH: RESISTANCE_FAILURE_ALARM
SOUND FAILURE SIGNALING
When a failure occurs, the appliance will emit 10 beeps and repeat the signal every 60 min. until it
is restored.
Note. In case of "self-resetting" faults (battery or 220V missing) the sequence of the 10 Beeps may
stop earlier, so if the signals are irregular in the Beep number or the repetition, it means that we
are in the presence of a "false contact" on the battery or on the 220V mains.