Defender SENTINEL 3, Инструкция по эксплуатации

Страница: 54 / 70

SENTINEL 3 54
Picture is too bright:
- Make sure your camera is not aimed at direct
sunlight.
- Adjust the sunshade by sliding it forwards to block
out excess light.
- Make sure nothing is obstructing the CDS sensor
on the camera. If the CDS sensor is blocked,
night vision mode will be active and may produce
extra light in your camera’s picture.
- Move your camera to another location.
Picture is too dark:
- If using at night, make sure your camera’s subject
is no more than 15ft away (may vary based on
amount of ambient light available).
- If using during the day, your camera may not
be getting enough light. Adjust the sunshade by
sliding it backwards to let in more light.
- Check the brightness and contrast settings on
your TV/monitor
- If your camera is connected to a VCR/DVR, check
the brightness and contrast settings on the VCR/
DVR
- Move your camera to another location.
Night Vision is not working
- The night vision turns on automatically when
light levels drop. Try the camera in a pitch black
setting. The area that it is in may have too much
light and may not activate the sensor.
10. NETWORK INSTALLATION
10.1 SYSTEM CONFIGURATION