Defender Phoenix 2.4", Руководство пользователя

Страница: 5 / 22

8 9
LET’S GET STARTED!
Battery Installation
1. Gently remove the STAND CLIP on the back of
the monitor to allow access to the BATTERY
COMPARTMENT COVER.
2. Slide the BATTERY COMPARTMENT COVER down
to remove.
3. Insert the battery with the words "Rechargeable
Battery" facing towards you. The battery connectors
should line up with the connectors inside the
battery compartment.
4. Slide the BATTERY COMPARTMENT COVER back into place and
reinstall the STAND CLIP.
Get the Most Out of Your Rechargeable Battery
•
Fully charge battery (4 hours) before first use.
•
To maximize battery life, charge battery before battery is fully drained.
•
Avoid extreme heat or cold as this will affect the life of the battery.
•
Turn LCD screen OFF; press POWER button on the front of the monitor ONCE.
•
Phoenix
™
2.4
"
menu settings that increase battery life:
Power Save Mode : After 1 minute of inactivity, monitor enters standby/sleep mode.
Adjustable Brightness: Decreasing screen brightness will extend battery life.
Turn LCD screen OFF : press POWER button on the front of the monitor ONCE.
5. For extended periods of non-use, please remove battery from monitor.
1. MICROPHONE
2. POWER ON/OFF BUTTON
3. PAIRING BUTTON
4. INVISIBLE NIGHT VISION LEDs
5. CAMERA
6. POWER LED
7. LIGHT SENSOR
8. SPEAKER
9. POWER INPUT
CAMERA SETUP
Battery
connectors
CAMERA ANGLE WEDGE
FRONT BACK SIDE
7
6
9
8
1
2
4
3
5