DeFelsko PosiTest HHD, Инструкция по эксплуатации

Страница: 15 / 72

13
manufactured in accordance with the UN Manual of Tests and
Criteria Part III subsection 38.3. When transporting the
PosiTest
HHD
or shipping the battery separately, observe all local regulations.
Use care when handling the rechargeable Li-ion battery.
The battery may be damaged if dropped. NEVER use a cracked,
swollen or otherwise damaged battery. DO NOT puncture,
disassemble or modify the battery. DO NOT expose the battery to
high temperatures or dispose in fire.
CAUTION:
Storing the PosiTest HHD
When not in use, the
PosiTest HHD
should be stored in the supplied
Pelican Storm case.
Keep the instrument clean and dry. After use, clean the instrument
with a soft, damp cloth, then wipe dry. Do not use solvents such as
lacquer thinner, methyl ethyl ketone, etc.
Keep all electrical contacts clean.
IMPORTANT:
PosiTest HHD Troubleshooting
PosiTest HHD will not detect holidays
w
Check Electrode Connections:
With the detector powered OFF,
check all connections. Ensure the extension rod is fully engaged
within the barrel of the
PosiTest HHD
and the lock gate is
engaged.
w
Check Ground Connections:
With the detector powered OFF,
remove the ground cable and fully reinsert it twisting clockwise
180° until locked. Ensure the opposite end is clean and well
connected to the substrate of the coating system being
inspected.
w
Check Test Voltage:
If the test voltage is too low, the
PosiTest
HHD
will not find holidays.
w
Reduce Travel Speed:
Recommended travel speed of the
PosiTest HHD
is a maximum of 0.3m/second (1ft/second). Since
the
PosiTest HHD
operates at a pulse repetition rate of 30
pulses per second, it is possible to miss holidays if the travel
speed exceeds the recommended maximum.
Always contact your carrier prior to shipping this
battery to ensure compliance with local regulations.
IMPORTANT: