DeFelsko PosiTector CMM IS, Инструкция по эксплуатации

Страница: 6 / 64

4
Using a PosiTector Advanced:
To view available probes, select Bluetooth Smart from the gage’s
Connect menu. Then select Smart Probes (shown below):
Available probes within 10 m (30 feet) will appear as “CMMIS”
with the corresponding serial number and latest relative humidity
reading, as shown below:
Select a probe to display its Relative Humidity and Temperature
values. Once connected, a blue light is emitted from the bottom
of the probe and values are updated every five seconds.
When a PosiTector DPM environmental probe is
attached to the PosiTector body, PosiTector CMM IS
measurement data can be recorded into the gage’s memory.
When any other probe is attached, such as a
PosiTector 6000
probe, PosiTector CMM IS readings can be viewed only.
NOTE:
Calibration
Calibration is typically performed by the manufacturer or a
qualified lab. All
PosiTector CMM IS probes include a Certificate
of Calibration. In accordance with ASTM F2170, probes must be
recalibrated annually. DeFelsko recommends beginning the
calibration interval from either the date of calibration, date of
purchase, or date of receipt.
Verification of Accuracy
It is recommended that PosiTector CMM IS probes be stored
Calibration & Verification of Accuracy
Checking the
Shortcut box
on the Smart
Probes screen
will enable
access to the
Smart Probes
screen from
the gage’s
main menu: