www.defa.com
www.defa.com
Remote Control | RF Wireless
Description
The Remote Control controls the Daylight sensor only.
The HRC-11 provides a fast and easy way to customize the Daylight sensor. Alter the settings using the
functions as described below. The fixture will emit a flash when a new setting has been received.
Permanent On/Off function
Press “ON/OFF” to select permanent ON or
permanent OFF mode. Press “AUTO”, “RESET” to
quit this mode.
Auto Mode
Press “AUTO” to initiate automatic mode. In this
mode the sensor and fitting behave according to
your selected settings.
Reset function
Press “RESET”, to restore default settings
on the DIP switches.
Shift
Press "shift" to use secondary button values
marked in red. "Shift-mode" is active for 20
seconds.
Daylight threshold
Press these buttons to set the Lux level to 2Lux/10Lux/50Lux/Disable. The fitting will not activate if the
ambient light is above the selected level. If set to Disable, the fitting will always be activated.
Ambient daylight threshold
l. Press button “Shift”, the red LED is on for indication.
2. Press button “Ambient”, the surrounding lux level is sampled and set as the new daylight threshold.
Note: all other buttons are disabled.
