Switch on your Deeper for scanning
Launch the Deeper app in your smartphone or tablet, then put your fishfinder in the water close to where you are
(no further than 2m / 6ft). Your Deeper START will automatically turn on and connect with your mobile device.
ⓘ If your Deeper START is in the water but doesn’t connect with your mobile device (in the Deeper app
you will see the status message Deeper is disconnected at the bottom of the screen), please follow these steps:
1. Open settings in your mobile device and make sure that Wi-Fi is on.
2. Make sure your Deeper START’s battery is charged. When you’re out on your fishing trip you can connect
your fishfinder to a car charger or a portable power bank and check which light shows. If the battery is
empty, charge it!
3. Check the temperature. The Deeper START has an operating range of 0°C to 40°C / 32°F to 104°F. Please
note that water and air temperature may be different, and here water temperature is most important.
4. Make sure you are using a compatible mobile device and you are using the latest version of the app.
5. If the devices still don’t connect, contact our
Содержание START
