deeper START, Руководство пользователя

Страница: 12 / 99

Some Android phones have a similar feature, although the name of it may vary depending on the model of the
phone. On Samsung phones, it is called Smart network switch. Other Android phones may have a similar feature
with a different name. Please make sure that you turn off any settings that make your smartphone automatically
disconnect from Wi-Fi networks with a poor internet connection. Other possible names for this feature include:
Adaptive Wi-Fi / Auto Network Switch / Wi-Fi+.
If you’re using any VPN services that may require a Wi-FI connection it is better to turn them off. If you don’t, the
Deeper App may have difficulties connecting to the device automatically.
Positioning of the smartphone/tablet
Do not to keep your smartphone or tablet on the ground while using the Deeper, as this can also reduce the
strength of the signal. To maximize connectivity you should use the Deeper Smartphone Mount.
If you are using a smartphone case, it’s better to take it off as it may absorb the signal.
Connectivity
Please also note that it is only possible to connect to the Deeper using one smart device at a time. This means it
will be impossible to connect to a Deeper Sonar if it is already connected to another phone or tablet. To switch off
all current connections, simply take the Deeper out of the water, wipe it and wait for 5 minutes for the unit to turn
off. Then, put it in the water again and connect.
If the device connects when on charge but does not connect when in the water, please check the water sensors on
the bottom (the two metal points on the bottom housing of your Deeper). You can clean them by roughly scrubbing
them with a sponge, or an electronic contact cleaner can be used if needed.